Misdemeanor
New member
- 27
- 0
- 1
- Location
- Algonquin, IL
My Ring and pinion are badly worn so I got a new one the other day. Same PN 18396 and same manufacture - Salisbury.
My problem is the shoulder is different that the shims rest on and the over length is shorter for the outer bearing and yoke. I think there is a spacer or some kind of bushing that is should be used with this design but I am not familiar with it so I thought I would reach out see what others might have experienced. Any advise is appreciated.
![pinion difference.jpg pinion difference.jpg](https://www.steelsoldiers.com/data/attachments/386/386440-958ff6a627ff808ce760a53ba1fc562c.jpg)
My problem is the shoulder is different that the shims rest on and the over length is shorter for the outer bearing and yoke. I think there is a spacer or some kind of bushing that is should be used with this design but I am not familiar with it so I thought I would reach out see what others might have experienced. Any advise is appreciated.
![pinion difference.jpg pinion difference.jpg](https://www.steelsoldiers.com/data/attachments/386/386440-958ff6a627ff808ce760a53ba1fc562c.jpg)