- 12
- 10
- 3
- Location
- Upstate New York,
Looking for pintle hitch bolt hole dimension, Im going to change out the pintle and make a receiver. Something like this one
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M38 pintle hitch
- Thread starter M886
- Start date
- 562
- 1,361
- 93
- Location
- AL
I’m away for several days but will measure when I return if no one else responds sooner. Very nice looking M38!
- 12
- 10
- 3
- Location
- Upstate New York,
Thank you Mr. Hovering HMMWV, I found the information I was looking for. My vehicles are in storage for the winter and not easily accessible but I managed.
thanks again Sir
thanks again Sir
Mud Diver
Member
- 30
- 37
- 18
- Location
- Yorba Linda, CA
You still have the pintle hitch? I’ll take it off your hands for my M38A1 if you don’t need it.
- 12
- 10
- 3
- Location
- Upstate New York,
I will be keeping it, but thanks for your interest
Mud Diver
Member
- 30
- 37
- 18
- Location
- Yorba Linda, CA
Your welcome. Anyway, I'm going to go with one that has a ball for a civi trailer hitch.
- 101
- 197
- 43
- Location
- Rochester NY
Please post the finished product!
Cheers
Cheers
- 12
- 10
- 3
- Location
- Upstate New York,
I’ll try to post pictures tomorrow
Mud Diver
Member
- 30
- 37
- 18
- Location
- Yorba Linda, CA
3 3/8” across by 1 3/4” vertical
- 1,812
- 4,105
- 113
- Location
- Hidden Valley, Az
Seen too many ball hitches fail.
Never seen a lunette/pintle do that.
My non-military trailers have all been converted to lunettes.
It also really cuts down on guys wanting to borrow them...
Never seen a lunette/pintle do that.
My non-military trailers have all been converted to lunettes.
It also really cuts down on guys wanting to borrow them...
- 12
- 10
- 3
- Location
- Upstate New York,
OneSeen too many ball hitches fail.
Never seen a lunette/pintle do that.
My non-military trailers have all been converted to lunettes.
It also really cuts down on guys wanting to borrow them...
Seen too many ball hitches fail.
Never seen a lunette/pintle do that.
My non-military trailers have all been converted to lunettes.
It also really cuts down on guys wanting to borrow them...
Seen too many ball hitches fail.
Never seen a lunette/pintle do that.
My non-military trailers have all been converted to lunettes.
It also really cuts down on guys wanting to borrow them...
[/QUOTE
I certainly agree
Most people don’t do their homework, 2 5/16“ ball hitches come in 3 different lbs ratings (the shank determines capacity)
2 5/16 ball with 1” shank 6,000 lbs most common because there cheap!
2 5/16 ball with 1 1/4“ shank 10,000 lbs
2 5/16 ball with. 1 1/2“ shank 30,000 lbs
know your “Limits“. (lol)
- 12
- 10
- 3
- Location
- Upstate New York,
- 1,812
- 4,105
- 113
- Location
- Hidden Valley, Az
A strong ball is indeed better than a small one
All the failures but one were due to crappy couplers on the trailers.
The one was a ball sheared off in a hard braking incident, causing the tongue to come thru the back of a motorhome.
Nah...
All the failures but one were due to crappy couplers on the trailers.
The one was a ball sheared off in a hard braking incident, causing the tongue to come thru the back of a motorhome.
Nah...
Mud Diver
Member
- 30
- 37
- 18
- Location
- Yorba Linda, CA
That's what I'm thinking of doing, only paint it all green to look some what original.
JEB
Active member
- 140
- 160
- 43
- Location
- Colbert, WA
Perhaps I've led a sheltered life, but I've never seen a setup like that.