• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M3A1 Stuart TAnk Aerial Photo Recon!

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
326
0
Location
gainesville, ga.
For every hour of use, how much maintenance is needed on tracks and running gear
 

Steve Greenberg

Active member
Steel Soldiers Supporter
206
41
28
Location
Wilsonville, Oregon
M3A1 Stuart Tank

Ron,
There is not much houlry maintenance except for filling the gas tank! The last time I had to adjust my tracks was 4 years ago. The engine consumes about 1 quart of oil per 15 to 20 miles of driving.
Steve:cool:
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
326
0
Location
gainesville, ga.
Thank you, I would think it would take a lot more then that, to keep track iron going
 

Steve Greenberg

Active member
Steel Soldiers Supporter
206
41
28
Location
Wilsonville, Oregon
M3A1 Stuart Tank

Ron,
The biggest problem is fouling spark plugs. I am pretty good at changing them! There are 2 plugs per cylinder. The outer set I can change in an hour or so. The inside set took me and a friend 3 1/2 hours to change the last time I did it! The rubber track pads are going to be another big problem. A friend on mine & I are working on a project to make a new bolt on type rubber pad.
Steve:cool:
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks