• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M51, should I buy?

jimm1009

Well-known member
1,165
70
48
Location
Louisville, KY
I have owned a few M35 series and my last and most favorite was an M35A2C.

It is gone now and have a M51 truck available for a good price.
Any advantages to this truck or unique things that I should know about.

Right up front I want to remove and sell the OEM dump bed and probably bob it.
Please do not flame me but it is a new phase in my life and am entertaining this
project for fun.
Advice and suggestions are most welcome.
jimm1009 (Now in Baton Rouge, LA)
email: m1009jim@yahoo.com
 

jimm1009

Well-known member
1,165
70
48
Location
Louisville, KY
Sad to say that I do not have enough information yet.
Let's assume that it is not gas powered as I would not buy one that is not diesel.
Is there any difference in the model designation for gas versus diesel?
Jim
 

BEASTMASTER

Active member
899
142
43
Location
Burgaw, N.C.
hey let me know what u want for the dump when u decide. I've owned mine for 14 yrs. and plowed with it up mass. for 10 yrs. they get like 4 miles to gallon but will pull a house down. but in actuality a diesel only gets 4 to 6 miles a gallon. good luck
 

BKubu

Well-known member
Steel Soldiers Supporter
4,741
1,123
113
Location
Gaithersburg, MD
Unless the truck is very clean (i.e., uncommonly clean) and the price can't be beat, I'd suggest finding a tractor. You will have less work to get it where you want to. Plus, the dump trucks have good value in original condition. Good luck whichever way you go!
 

jimm1009

Well-known member
1,165
70
48
Location
Louisville, KY
After a couple of months I was able to stop by to see this truck again.
It seems that the hydraulic pump took a dump on the drive side.
They pulled the pump off and let it sit on the fender in the weather.
It look like it has been off for 5 years or more.
I assume that no coverplate was put on the engine to protect it
it is open to the humidity in Louisiana.
I have not tracked down the owner yet.
Is there any way to find out when it was made as in a similar manner to the 2.5 ton
using the s/n?
Oh and yes it is a diesel engine. It seems to be complete except for the batteries.

M51A2 WO/W
s/n 1649
Made by IHC
Contract 5157860
Jim
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks