- 2,811
- 41
- 38
- Location
- Mt. Eden, KY
Subscribed to keep up with the progress. Old school metal work, it's an lost art. Nice work.
JC
JC
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M52a1
- Thread starter mortarman
- Start date
Gunner0311
Member
- 189
- 2
- 16
- Location
- Millington, Michigan
Restoration
Photos look great. Good job on the restoration.
P.S. I am in love with your garage!
Photos look great. Good job on the restoration.
P.S. I am in love with your garage!
Vintagefarmer
Member
- 45
- 76
- 18
- Location
- Cambridge Minnesota USA
That... is a beautiful looking cab!
mortarman
Member
- 36
- 1
- 8
- Location
- South Australia
Hello everyone, I need some information please. I'm confused wether my truck is a M52A1 or is it a M818. Mine has the Mack engine with the cut out in the chassis to accommodate the Mack. it has a straight grill and the air filter on the right fender. The original data plate say's it's a M818. I'm sure with the wealth of knowledge here some one can shed some light on this for me.Regards
Colin.
- 4,300
- 3,132
- 113
- Location
- Fort Worth, Texas
Judging by the shape of the grill, location of air filter, and style of air filter you can be assured it is an M52A1 with the Mack engine. To be sure the M809 series (M818 exactly in this case) would have the cummins 250, which has no turbo, and your most recent photo shows one. The data plates can be swapped but the serials can't so compare it to what's stamped on the driver side frame under the front fender. I'd bet they don't match up.
Last edited:
mortarman
Member
- 36
- 1
- 8
- Location
- South Australia
Thankyou for your response. That certainly makes sense and I'll check the frame.Here's what my truck looks like as of today.
- 144
- 0
- 16
- Location
- Graham, WA
Beautiful work. Subscribed!
mortarman
Member
- 36
- 1
- 8
- Location
- South Australia
Just to go back a touch. I did take off quite a bit to clean, repair and paint.ducer
Member
- 297
- 1
- 18
- Location
- Ober, indiana
What year does your title say it is? According to your data plate it says it is a 71. What are your frame numbers? Do they match the data plate? (doubtful)
Denny
Denny
1954 COE
Member
- 56
- 2
- 8
- Location
- El Paso, Tx
Truly a labor of love! Amazing job. Thanks for sharing your restoration process.
mortarman
Member
- 36
- 1
- 8
- Location
- South Australia
I had a look for the numbers on the chassis rail. Is that where the numbers are suppose to be. Also on No26 picture 1, I have a plate sitting on the rear wheels, can anyone shed some light if it belongs to this truck. It came with it but was not fitted so I'm a bit baffled.
Regards
Colin.
Regards
Colin.
mortarman
Member
- 36
- 1
- 8
- Location
- South Australia
Hi all, I got pretty busy and got my old M52 finished. It drives really well and looks the part.
Colin.
Colin.
Attachments
- 2,891
- 1,516
- 113
- Location
- Czech Republic
What thickness of sheet metal you used for the simple body work? I have to repair some parts as well on my M51A2.
mortarman
Member
- 36
- 1
- 8
- Location
- South Australia
Hi Robo, I used 1mm thick material. Good luck with your project.
- 12,195
- 325
- 0
- Location
- gainesville, ga.
Real nice job
- 10,457
- 6,530
- 113
- Location
- Camp Wood/LC, TX
Looks great! I like the black chassis, I did my M275A2 exactly the same way.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Dunno how I missed this thread! You did a wonderful job restoring that truck, kudos to you!
green crazy
New member
- 8
- 0
- 0
- Location
- elk river,mn.
You did a great job in your restoration,I have two M-52 to restore one w/6602 and the other w/ a multifuel. Your work proves to everyone what dedication can achieve! Terry
mortarman
Member
- 36
- 1
- 8
- Location
- South Australia
Thankyou all for your comments. It's not perfect but quite rare in Australia and I'm happy with the outcome. I just need to find a good old trailer somewhere down here.
Colin.
Colin.
- 10,865
- 762
- 113
- Location
- Appomattox, VA
Awesome work, mortarman! Those 5-ton from the Vietnam era are getting hard to find in nice shape, even in USA. Thanks for saving a piece of history, it took a lot of effort on your part...
For those who say, "this truck isn't worth all that effort, find a nicer truck to restore", remember where he is. USA-made military trucks are rare in Australia, and shipping for parts from the dealers in USA to him couldn't be higher, since Australia is basically exactly on the other side of the world as we are.
For those who say, "this truck isn't worth all that effort, find a nicer truck to restore", remember where he is. USA-made military trucks are rare in Australia, and shipping for parts from the dealers in USA to him couldn't be higher, since Australia is basically exactly on the other side of the world as we are.