mill1970
Member
- 95
- 2
- 8
- Location
- worcestershire uk england
hello i need to change my multifuel injection pump can anyone tell me howto do this and how to time the pump up many thanks from a freind across the pond
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
m55 injection pump
- Thread starter mill1970
- Start date
- 34,013
- 1,814
- 113
- Location
- GA Mountains
You should have the TMs on hand for this one. Go to the TM section and right click on TM 9-2320-211-20 and TM 9-2320-211-34. Select save them to your computer. I forget which one has the details but one of them does. These are free downloads and you can print the section you need and take it right out to the shop with you.
- 3,021
- 221
- 63
- Location
- eldersburg maryland
much easier to change just the hyd head, usually the only part that fails
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
That's not the problem this time, the quill shaft snapped as we have read in past posts.
Michael, start by preparing the work "area", remove the front grill, the radiator, perhaps the driver's side fender, study the manuals and start asking more specific questions, please, no point in repeating the instructions from the TMs.
Michael, start by preparing the work "area", remove the front grill, the radiator, perhaps the driver's side fender, study the manuals and start asking more specific questions, please, no point in repeating the instructions from the TMs.
jakej1111
New member
- 14
- 0
- 0
- Location
- Baton Rouge,LA
Is there any way to replace the quill shaft with out taking out the injection pump?Mine has snapped as well.thanks..