Iyaayas184
New member
- 143
- 1
- 0
- Location
- Kansas
Does anyone out there have any inerior pics of an M551 Sheridan ? I am trying to replace some interior items that had been stripped from one.
Thanks,
Bob
Thanks,
Bob
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M551 Sheridan inrior pics wanted
- Thread starter Iyaayas184
- Start date
tigertank88
New member
- 1
- 0
- 0
What areas are you looking for? I have many pics of armor from a website that used to exist. Let me know.
- 8,539
- 2,758
- 113
- Location
- Monrovia, Ca.
I know where there is at least one. What do you want exactly?
Iyaayas184
New member
- 143
- 1
- 0
- Location
- Kansas
M551 Funniest Home Video
Well, had a bit of bad luck working on the Sheridan the other night, had been up and down the tank 5 or 6 times Thursday evening getting parts and had just stepped down off of the front of the turret over the smoke ejectors on to the hull when my right foot slipped and I went flying doing something like a reverese 360 pike with a tuck landing head first on the asphalt. I managed to not lose conciousness and did open a 30mm gash on the top of my head , then left shoulder, left arm and right elbow, bled profusely(good thing I keep and M3 bag in my truck because it isn't the first time something like this has happened to me)
. Was taken to the hospital by ambulance. was attended to by a very nice looking female doctor and got 4 staples for my trouble. Must not have learned my lesson because I was back working on it the next day.
Well, had a bit of bad luck working on the Sheridan the other night, had been up and down the tank 5 or 6 times Thursday evening getting parts and had just stepped down off of the front of the turret over the smoke ejectors on to the hull when my right foot slipped and I went flying doing something like a reverese 360 pike with a tuck landing head first on the asphalt. I managed to not lose conciousness and did open a 30mm gash on the top of my head , then left shoulder, left arm and right elbow, bled profusely(good thing I keep and M3 bag in my truck because it isn't the first time something like this has happened to me)
. Was taken to the hospital by ambulance. was attended to by a very nice looking female doctor and got 4 staples for my trouble. Must not have learned my lesson because I was back working on it the next day.
wgtactical
Well-known member
- 674
- 316
- 63
- Location
- Carrollton, Georgia
Where armored vehicles are concerned, I hear lots of stories of falls...some with much worse endings 
When I bought my first piece of armor, the guy I bought it from told me to maintain three points of contact at all times with no exceptions. So far, it has worked well for me. Sorry to hear you were hurt, but glad it was not worse as it could have been!
When I bought my first piece of armor, the guy I bought it from told me to maintain three points of contact at all times with no exceptions. So far, it has worked well for me. Sorry to hear you were hurt, but glad it was not worse as it could have been!82ndtanker
New member
- 2
- 0
- 0
- Location
- Troy,Ohio
Go to http://svsm.org/gallery/M551_1?page=1 This is from the Jacques Littlefield Collection, His pics look nice and brought back some good memorys.
82ndTanker
82ndTanker
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
Contact these people, they may be able to get what you need.
M551 Sheridan Walk Around Page 1
M551 Sheridan Walk Around Page 1
drewmech
Member
- 82
- 29
- 18
- Location
- Tulsa Oklahoma
Where do you guys find these things? I mean seriously owning a piece of tracked armor would be just as cool as it gets.