• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M715 backfiring

Knottofs

New member
59
0
0
Location
White Level, NC
M715 backfiring
[FONT=&quot]New plugs, wires, coil, distributor cap, Electronic ignition and fuel filter. Runs good for a minuet then starts to bog down and then will back fire. Any ideas[/FONT]
 

bcowanwheels

Member
490
2
18
Location
KINGSPORT, TN.
PULL VALVE COVER AND CHECK CAM LOBES FOR WEAR & valve adjustment , IF alls good there then check shaft in distributor for it being loose in hsg. if good there then cam chain is stretched or tensioner is bad. you might also do a compression check on all 6 cyls. also lastly you might setup a new temporary small fuel tank and try the engine running off just it because the m715's are notorious for having comtaminated fuel tanks.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks