M715 Blackout stop light and trailer plug

[KsM715]

Does anyone have a close up pic of the single small blackout stop light on the pass. side of the rear of a M715? also is the trailer plug the same on most MV's? I got a small single blackout stop light and trailer plug off a scapped ammo trailer (free ). I think the trailer plug will work but from the pics I've seen I cant tell if the light is the same.

 

[NDT]

Trailer plug is the same and the BO stop should be too, there was only one version of this lamp for BO stop. The wire plugs directly into the lamp.

 

[KsM715]

The one picture I saw (on m715zone) looked like it had 4 bolts holding it onto the rear bumper/cross member. the light I have is bullet shaped and has the mounting hole on the bottom. If anyone has a close up pic I'd like to see it.

I posted here rather than the zone because this site is way more active than over there. thought I might get a quiker response

 

[NDT]

You are missing the little L shaped bracket that holds the lamp to the rear bumper. You can fab one, there is not much to it.

 

[Wolf.Dose]

The 12 pole trailer receptical is a NATO standard part. The black out brake light also. As said befor the necessary clamp you easily can make youself.
27 years with a M715.
Wolf

 

[Barrman]

The bracket is just bent steel. Here is a stock bracket and a piece of 12 gauge I bent next to each other. Along with a picture of the set up on the truck.