M8 Grayhound project?

[GPW1942]

Hi All,

Thinking about getting into an M8 project.
What does the would of surplus / takeoff parts look like?

Fenders, motor, seats, transmission, covers for engine and driver's compartment, section of armor behind the pintle and pintle?

Are there any turrets and 37mm out there?

Any help is appreciated.
Dj in NE PA

 

[NDT]

The parts you mentioned are EXTREMELY hard to find. If at all. Try inquiring on G503. Not much armor discussion here.

 

[m1010plowboy]

Is that M8 as in 6x6 fun? This one might be similar.

I stole this photo from DG after the Valour Park folks up North dragged some Steel Soldiers to a Nov. 11th event. I can message some contact info if you want to reach out to a fella that recently finished this one. Here's a little article and a photo how things looked when he started. https://globalnews.ca/news/10155610/valour-park-association-military-museum/

 

[GPW1942]

Is that M8 as in 6x6 fun? This one might be similar.

I stole this photo from DG after the Valour Park folks up North dragged some Steel Soldiers to a Nov. 11th event. I can message some contact info if you want to reach out to a fella that recently finished this one. Here's a little article and a photo how things looked when he started. https://globalnews.ca/news/10155610/valour-park-association-military-museum/

View attachment 935783View attachment 935787

Yes please message me some contact info. Thank you. Dj