M816 hoist issue

[ChevyC60]

Used the M816 yesterday to lift cover off deuce engine can.
Did a couple up and downs with the hoist and no problems.
When I went to lower cover back on the can hoist would not go down.
Tried up and it still works. The cable drum does not turn and sounds
like hydraulic pump bogs down. Boom in-out, up-down and left-right still work fine.
Any ideas?

 

[SETOYOTA]

jammed with a foreign object maybe

 

[calvin3103]

M62 hoist cable done broke off

i found some TMs for the M39 Sieries but says it a crouped file when i down load it, but any ways does any one know how to get the cable out of the hoist spool? i read it takes 90 feet or so i have never worked on a wench i can see it goes into the drum i have not got that far yet to see if its just layed in there, or do i have to take it apart to put the new cable in?.

 

[gimpyrobb]

If I remember right, the cable is held in with a metal wedge and bolt/set screw.

 

[Welder Sam]

got an output seal leaking on my hoist... right where the spool goes into the gearbox.... drip drip drip