acudanut
Active member
- 99
- 45
- 28
- Location
- Gardner, Ks
I am putting it on a 1 ton dually dodge, with a 12 Valve cummins engine. 3 times the power and fuel milage. Plus it will have A/C.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M886 Dodge Ambulance
- Thread starter snakeyes
- Start date
- 10,642
- 6,991
- 113
- Location
- Camp Wood/LC, TX
The box with cutaway cab attached should bolt right onto a first generation Dodge Cummins truck chassis. Some body mounts may be different.
acudanut
Active member
- 99
- 45
- 28
- Location
- Gardner, Ks
Is the Top welded on to the roof ?
- 10,642
- 6,991
- 113
- Location
- Camp Wood/LC, TX
The fairing which replaces the cab roof is spot welded to the windshield frame and the ambulance box.
acudanut
Active member
- 99
- 45
- 28
- Location
- Gardner, Ks
Ok, Thanks
acudanut
Active member
- 99
- 45
- 28
- Location
- Gardner, Ks
What else must I do to remove the box ? Anything riveted to the back side of the cab ? I got the top and side ones drilled out. Thanks for any advise.
The frame bolts are out btw.
I have a new cab. I want the Box off !! What's holding me up on the back of the cab to remove it ?
The frame bolts are out btw.
I have a new cab. I want the Box off !! What's holding me up on the back of the cab to remove it ?
Last edited: