• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M915A3 Wiring

Socommfg

Member
135
9
18
Location
n. Augusta sc
I am installing a NEW M915A3 body on a rollback.

Question> There is 5 terminals on the fire wall: right hand side 2 smaller Black STUD terminals Center 1 LARGE Red terminal Left: 2 RED smaller Studs. Can anyone lead me in the20211116_162601.jpg right direction on wiring these.
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,088
9,248
113
Location
Mason, TN
I am installing a NEW M915A3 body on a rollback.

Question> There is 5 terminals on the fire wall: right hand side 2 smaller Black STUD terminals Center 1 LARGE Red terminal Left: 2 RED smaller Studs. Can anyone lead me in theView attachment 851349 right direction on wiring these.
Round is for lighting others are just engine plugs for sensors/gauges reading from the ddec ecm.
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,088
9,248
113
Location
Mason, TN
You can ohm test from the gauge outputs to the pins at the plug to figure out which one is which.

I went with mechanical gauges and swapped em out and then just wired the switch thru the fuel solenoid and starter etc.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks