• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

m916 m920 fuel shut off

86m1028

Active member
1,687
16
38
Location
Murphy TEXAS
Im looking for a fuel shut off for an M916.

I have searched on here & could have sworn Wreckerman had posted a part #.

Any help would be great, Napa & other truck shops around me are clueless.

Thanks in advance.
 

86m1028

Active member
1,687
16
38
Location
Murphy TEXAS
I got one at Fleetpride but it was a 12 volt.....needs to be a 24 volt (I think....could be visa versa.......dam CRS)......SS member Rracing (Jim) sent me the correct part. If your local Fleetpride can't get you one contact Jim to find his source.

FleetPride: Homepage

Thanks Wreckerman893, I'll pm Jim.

I think its 12volt on the m916.
I have an m915 for parts & the one on it is 24v & not used.
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,196
314
0
Location
gainesville, ga.
Isn't the fuel shut off the standard cummins shut off 12v/24v just like the one on the ones on the 855 250, if so you can get then about any truck shop, a lot cheaper then cummins or a MV vendor
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks