M916/M920 parts help and tech manual needed

[Andydieselpower]

Hello,

Does anyone here know where to source the part or have a part number for the 3 way diff locker switch on the dash on an M920/M916?


Anyone have good leads on who bought some of the partially parted out M916/M920's in TX a year or so ago? Ph# Contacts?

Also does anyone have a copy of the TM's for this series of truck? I have all of them on our website for free downloads with the exceptiion of these. If somebody has a copy I'd gladly pay them for copy!

Any help would be appreciated.

Thanks,
Andy

 

[Andy1234]

Andy,
I have the tm's. Send me your email and I'll send them your way.
Andy

 

[Castle Bravo]

PAOZZ 06853 285402 VALVE,LINEAR,DIRECT

Bendix 285402

Page 83-1 in the -24P

 

[quickfarms]

I could also use the tm's

 

[Andy1234]

I could also use the tm's

Send me a pm w/ your email address and I'll send them.

Andy

 

[Andydieselpower]

Thanks Andy! I'll pm you right now. Have a good weekend guys

Andy

 

[Andydieselpower]

Does anyone know where to get the diaphram for the transfer case?

Part #?

Thanks again

 

[Castle Bravo]

Look at figure 79 in the -24P.

 

[Cariboo6X6]

Hi Andy,

Any chance on getting a set of the TM's for the M916? You can send to cariboo6x6@gmail.com

Thanks and all the best,

Mike

 

[hcfs22dq]

Does anyone have a TM for a M916 tractor?

 

[chrisgardiner]

TM for M916

Hi please can someone send me the TM for the CCC M916 Military truck

christopher.gardiner@intercaribbean.com

Thanks Chris

 

[Artisan]

I would be much appreciative if someone could email
me all the TM's and LO's etc et all for an M916

Thank U!

 

[redstroke]

can you email me one for a M920 as well? Thanks

 

[Warthog]

http://www.steelsoldiers.com/showthread.php?121484-TMs-for-M915-to-M920-Series-trucks

http://www.jatonkam35s.com/jatonkaM915seriesTMdownloadpage.htm

 

[NDT]

All manuals incl. LO available for download on JATonkaM35.com website.

 

[Muscadine Timber]

I am looking for a wiring schematic for a m920 where can I find one?
Muscadine Timber

 

[NDT]

I am looking for a wiring schematic for a m920 where can I find one?
Muscadine Timber

Welcome. See if this works for you.

 

[Artisan]

NDT that is the schematic for the M915, although VERY close it is not perfect.
There is an M916-M920 Elec Schematic .jpg File I made in the "Artisan's M916" thread.

Look at the very bottom right corner and read what it says.

 

[NDT]

Yes Artisan you are correct. Missed your jpg of the schematic, need to download it now for future reference!