M916 owners, a question

[Artisan]

Well the low lifes are at it again.

Parts stolen off my new truck makes me livid.

Unfortunately I am having a hard time finding OE Mud Flaps / Splash Guards
and their hangers, rear.

Can someone w/ an M916 tell me if the left and right hangers I see at the
bottom right of THIS WEBPAGE are what I need and what size are the OE
flaps themselves please? Dang I wanted OE w/ the keeper pins but looks
like the thieves deprive me.

I have the TM's and they are no help. They only give part numbers.
I have searched part numbers and found only one NSN and and and ...............


There are many sizes / lengths of flap hangers. I see they are a coiled style
and they are straight, not angled on the end but what length? There
are many lengths...

I do not get the truck till next week so I can not measure nuttin',
and driving it less flaps is a ticket.

 

[NDT]

Get the 24x36 plain flap and the 29.75 hanger with the coiled end. The prices on your website are way high. The complete hanger kit (L&R) should be around $50.

 

[Artisan]

Thank you!!!!!!!!!!!!!!!!!!!!!!!!!

 

[goodguyzy]

Where were these stolen?

 

[Artisan]

All evidence says the GL lot.

 

[Old Lincoln County Iron]

What 916 did you finally end up getting? I want one so bad!

 

[Artisan]

I got the one someone defaulted on. Well, I do not hav eit yet.
I pray the lot does actually get into my hands. It had 967? some od miles
on it when it was rebuilt in 2008, now it has 1086.

It is like new less some minor corrosion here and there, a little massaging and
I will try to make what little there is disappear. Off road tires. Cat tranny.
400 Comeapart. I envision the winch ON THE FRONT! THAT will be badazz.

 

[doghead]

Can you post the nsn # here for reference?

 

[Artisan]

Doghead I am not sure which NSN you want, I have been struggling to get any RE: Splash Guards

The truck itself is easy; M916 = 2320-01-028-4396

In the parts TM no NSN is listed but on alicorp I found one;

MS51331-6 = 2540-00-921-5069

MA203-30025 = ?????????????

Here are the pics from my TM showing no NSN's;

 

[Artisan]

Yes I will prob be able to find something to fit but anal and
my middle name all use the same letters, no more, no less.

I would prefer it all to be green parts.

 

[doghead]

http://www.steelsoldiers.com/archive/index.php/t-41420.htmlb-849

betts spring co.

Your thread title really should contain a key word in it.

 

[doghead]

Any reason why you did not just continue this thread( http://www.steelsoldiers.com/showthread.php?121183-M916-mud-flaps-left-amp-right ) I found while searching for mudflaps?

 

[goodguyzy]

This is out of Fontana? This wouldn't surprise me, the lot is wide open and there were a bunch m1070 that were missing mud flaps. Just speculating but someone could of snagged them of your truck without being noticed. I worked on my truck for an hour there and could of stole anything from the other trucks.

 

[Artisan]

I think I found a Kit made by BETTS Spring ( THANK U doghead! for that lead, not it, but it helped )

http://www.bettshd.com/type-straight-coiled-c-79_1_2_51-l-en.html

There are only 3 hangers they make that have the hole in the bottom so
you can cotter pin / clip it in, that is the last three on this web page.

What I NEED to know is does the M916 have .640" or .750" square ends on the hangers?

TIA

 

[goodguyzy]

I have a tape measure and the square metal that is the spring and mud flap support measures 5/8 x 5/8 or .625.

 

[Artisan]

I have a tape measure and the square metal that is the spring and mud flap support measures 5/8 x 5/8 or .625.

thank you !