• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M916A1 fuel priming problems - primary pump

zebedee

conceptualizer at large
Steel Soldiers Supporter
1,661
881
113
Location
Central NY
Need to 'Prime Fuel System' as I have a no start situation. Trucks been standing for a while and primary fuel filter has dried!!?? No fuel comes from the sediment drain on base of #1 filter.

TM 9-2320-363-10 is not in (the TM section of) this site.

Thanks
 
Last edited by a moderator:

zebedee

conceptualizer at large
Steel Soldiers Supporter
1,661
881
113
Location
Central NY
I see them all there thanks. -20-2 says -10 is where the "Prime Fuel System" is found, but -10 is operator, manual.... I should have recognised that number, however the -10 doesn't have priming instructions, only filling...
 

zebedee

conceptualizer at large
Steel Soldiers Supporter
1,661
881
113
Location
Central NY
M916 fuel parts.png
Well it looks like the diaphragm in the primer pump - part of the "primary filter water separator adapter" #30 is not playing nice. Can't get anything out of the outlet port when manually pumping or cranking.
Do any of the mil parts dealers carry NoS Detroit spares? I am sure that the regular Freightliner or Detroit specialist will charge a pretty penny...
 

Attachments

Last edited:

WillWagner

I was dropped on my head as a child
Super Moderator
Steel Soldiers Supporter
8,657
3,029
113
Location
Monrovia, Ca.
Could be a line or tank issue. try cracking the line out of the filter head and put a little compressed air into the fuel tank.
 
Top