M920 tach cable issue, wiring, throttle linkage springs, picture request

[Thomas_G]

Hello.

so I took over installing the fuel pump (new). Well the new tach cable 6680-01-082-6802 the pump end cable side is incorrect size. Anyone have a idea where I can get one.

Also anyone have pictures of the throttle spring set up and wiring to the shut off solenoid and 10 psi switch.

 

[155mm]

I can get you photos tomorrow in the sunlight

 

[Thomas_G]

I can get you photos tomorrow in the sunlight

Thank you.

 

[Thomas_G]

sent you messege

 

[Thomas_G]

Some pictures of what I have

 

[155mm]

 

[155mm]

Tell me what other pictures you need

 

[Thomas_G]

That’s what I needed. I am missing that bracket for the spring. Is there another spring on the rear of throttle linkage? A diagram I found shows one

 

[155mm]

Yes, at the pivot point under the cab

 

[WillWagner]

There are two sizes of tach drives, The small one is the most common, the large one is what is used on the military pumps. Take the new and old pump to a pump shop and they can swap them

 

[Thomas_G]

There are two sizes of tach drives, The small one is the most common, the large one is what is used on the military pumps. Take the new and old pump to a pump shop and they can swap them

Both have same tech drive. My problem is i can’t find the replacement cable.

 

[155mm]

Try a Peterbilt kenworth freightliner, tell them any mid 80s truck, with a 400 Cummins,

 

[Thomas_G]

Try a Peterbilt kenworth freightliner, tell them any mid 80s truck, with a 400 Cummins,

Pete or KW dealer go too?

 

[WillWagner]

Dealer will want a VIN, they can't do anything without it. What is broken, the cable?

 

[155mm]

I called our parts house here, he said 6’ tach cable with big collar for big cam 3 is about $120. I will get hard measurements tonight and verify they are the same

 

[Thomas_G]

Dealer will want a VIN, they can't do anything without it. What is broken, the cable?

Yeah cable broke in half

 

[Thomas_G]

I called our parts house here, he said 6’ tach cable with big collar for big cam 3 is about $120. I will get hard measurements tonight and verify they are the same

Let me know. 248.916.8250. It has the smaller .166 diameter end. Not the larger .200