- 6,853
- 672
- 113
- Location
- Stratford/Connecticut
Hi all I am in the process of installing reverse lights in my 923. I got the allison reverse pressure switch part 29503665. On the passenger side of the trans there is a port for the switch there is a bolt in its place. When the bolt is removed with the vehicle cold no fluid came out and the switch just screwed in by hand and I snugged it up with a wrench. I ran a wire up into the cab you can see a red arrow pointing to it in one of the pics. I have a 20amp solid state dc control relay and I bought a sealed plastic box I am going to mount it under the dash. I put the truck in reverse and verified with a meter that the switch is functioning properly. I installed 2 led flood lights in the back all I have left to do is run a wire up to the cab from the lights and find power somewhere. If someone knows a good place to grab 24 volts under the hood preferrably please let me know. I am also putting a switch in the cab so I can put the lights on manually.
![3.jpg 3.jpg](https://www.steelsoldiers.com/data/attachments/288/288990-4e5bb4fe28806bfe41ded03ccd2f74c2.jpg)
![4.jpg 4.jpg](https://www.steelsoldiers.com/data/attachments/288/288991-5773cd8bc9c0053c46bab560a6c185ab.jpg)
![2.jpg 2.jpg](https://www.steelsoldiers.com/data/attachments/288/288992-3e59b1159e65933752d3f4f2a40dc102.jpg)
![1.jpg 1.jpg](https://www.steelsoldiers.com/data/attachments/288/288993-92092a04e512410631d9932070779fe5.jpg)
![3.jpg 3.jpg](https://www.steelsoldiers.com/data/attachments/288/288990-4e5bb4fe28806bfe41ded03ccd2f74c2.jpg)
![4.jpg 4.jpg](https://www.steelsoldiers.com/data/attachments/288/288991-5773cd8bc9c0053c46bab560a6c185ab.jpg)
![2.jpg 2.jpg](https://www.steelsoldiers.com/data/attachments/288/288992-3e59b1159e65933752d3f4f2a40dc102.jpg)
![1.jpg 1.jpg](https://www.steelsoldiers.com/data/attachments/288/288993-92092a04e512410631d9932070779fe5.jpg)