bsteinborn
Member
- 54
- 0
- 6
- Location
- Keller, TX
I've been thinking of buying an M923 from a friend of mine. I already own a deuce. Then I came across this information,
"The safety of the M939 series of trucks has been criticized, especially braking performance and stability when loaded. In 1999 the US Army began refitting anti-lock brake systems to the M939 trucks. Until the trucks were modified, they were limited to a 40 mph (65 km/h) top speed by an Army-wide safety order.
Prior to that improvement, 26% of all Army vehicle accidents and 53% of all Army vehicle accident fatalities were in M939 series trucks. From 1987 to 1998 the series made up 9% of the total US Army vehicle inventory, but accounted for 34% of all fatal accidents. [2]
The problem seemed to be that the torque converter would "lock up" in 2nd gear, and would not unlock easily. When the driver attempted to brake hard, often in a sudden or 'panic' stop, and accidentally locked the brakes (no wheel movement, tires skidding), this would kill the engine; this also killed the power steering, and the driver would suddenly be unable to steer. Too often, the truck would veer sideways and either hit something or roll over."
I don't haul anything is this just an issue when loaded? Any fix been done? Did some searching on SS but couldn't find anything. If any 5 ton owners have any information I'd appreciate it. Just want to be as safe as possible. Thanks!
Bryan
"The safety of the M939 series of trucks has been criticized, especially braking performance and stability when loaded. In 1999 the US Army began refitting anti-lock brake systems to the M939 trucks. Until the trucks were modified, they were limited to a 40 mph (65 km/h) top speed by an Army-wide safety order.
Prior to that improvement, 26% of all Army vehicle accidents and 53% of all Army vehicle accident fatalities were in M939 series trucks. From 1987 to 1998 the series made up 9% of the total US Army vehicle inventory, but accounted for 34% of all fatal accidents. [2]
The problem seemed to be that the torque converter would "lock up" in 2nd gear, and would not unlock easily. When the driver attempted to brake hard, often in a sudden or 'panic' stop, and accidentally locked the brakes (no wheel movement, tires skidding), this would kill the engine; this also killed the power steering, and the driver would suddenly be unable to steer. Too often, the truck would veer sideways and either hit something or roll over."
I don't haul anything is this just an issue when loaded? Any fix been done? Did some searching on SS but couldn't find anything. If any 5 ton owners have any information I'd appreciate it. Just want to be as safe as possible. Thanks!
Bryan