Amgeneral1
New member
- 8
- 0
- 0
- Location
- Glen Mills Pa
I was looking for a little advice from you guys. I took the truck for a 100 mile round trip on Friday. I had the front drivers side brake get real tight on me fortunately very close to a trucking company I used to work at. I was able to pull the truck in and back the adjuster of a little bit to spin the tire freely. Knowing that it may or may not work I was on my way and within 10 miles it was smoking hot again. I was able to park the truck at a buddies farm till I could really spend some time on it. Would I be assuming that pulling things apart and getting a good cleaning and grease on the wedge assembly things should be ok? Any other ideas?