• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

m923a2 abs light on constant

Amosclifford1978

New member
10
3
3
Location
Celina ohio
I have a 1990 bmy m923a2 that the abs light stay on as soon as the switch is turned on and never goes out. i installed a new ecm as i assumed it was the problem do to the generator going way over voltage. New module does the same thing. Where should i check next? Thinking about ordering the diagnostic scanner but prefer not to spend $250 for one time use.
 

Jbulach

Well-known member
Steel Soldiers Supporter
2,720
2,311
113
Location
Sunman Indiana
Someone on here did a good write up years ago on repairing all the damage to the CTIS, ABS and a few other things, caused by over voltage due to failed generator or improper shutdown sequence. Hopefully the user name will come to me… maybe @saddamsnightmare ?
 
Top