M923a2 dying/ sputtering at WOT.

[Anthony gervasi]

I have a 91 m923a2 that started sputtering after WOT for a few seconds. Idles fine. Noticed the next day there was a good drip coming from the silicone at the top of the fuel pressure transducer where the wires come out. I believe it’s just sucking air witch is causing the sputtering. Anyone know where I can get a new one? Part number (kulite 19207-12258932-4) 0-20 psi thanks

 

[simp5782]

I have a 91 m923a2 that started sputtering after WOT for a few seconds. Idles fine. Noticed the next day there was a good drip coming from the silicone at the top of the fuel pressure transducer where the wires come out. I believe it’s just sucking air witch is causing the sputtering. Anyone know where I can get a new one? Part number (kulite 19207-12258932-4) 0-20 psi thanks

You do not need it. Put a pipe plug in it and roll on. Its for the diagnostic unit for the truck.

M923A2 Fuel Pressure Transducer

During the 4th of July parade fuel started leaking out the top of the Fuel Pressure Transducer which is located atop the line primer on the LHS of the engine block (Cummins 8.3L). Cant find a replacement unit. Original was made my Kulite but they no longer list the part # 19207-12258932-4. The...

www.steelsoldiers.com

 

[Anthony gervasi]

You do not need it. Put a pipe plug in it and roll on. Its for the diagnostic unit for the truck.

M923A2 Fuel Pressure Transducer

During the 4th of July parade fuel started leaking out the top of the Fuel Pressure Transducer which is located atop the line primer on the LHS of the engine block (Cummins 8.3L). Cant find a replacement unit. Original was made my Kulite but they no longer list the part # 19207-12258932-4. The...

www.steelsoldiers.com

Thank you!