Kennyw1981
New member
- 3
- 0
- 0
- Location
- Robertsdale, AL
Hi all, Im new to this site and these trucks. Ive recently purchased a 1993 Model M923A2 Dump truck and am having transfer case issues. I can only drive the truck foward using the front wheels. I do not have reverse at all and no power to the rear axles. Ive tried every combination I can come up with and no matter what i do I can only go foward using the front wheels. Transmission is fine, the input shaft from the transmission spins as it should in foward and reverse.
Also I'm postive its not the original Transfer Case. The linkage for the High/Low shifter has been modifed to the right side of the truck, the original trasfer case high/low linkage wason the left of the transfer case and the current case is on the right. Odds are I am going to need a new transfer case im sure but im not sure which one i have, the numbers i find on it bring up a couple different ones. I dont mind going back to the original one but not sure what the original one was. 5875E317 is the one in it and has an overhaule date of 4/82 which is much older than the truck.
Any help/Info would be greatly appreciated. I attached a couple pictures of the transfer case. Thanks
Also I'm postive its not the original Transfer Case. The linkage for the High/Low shifter has been modifed to the right side of the truck, the original trasfer case high/low linkage wason the left of the transfer case and the current case is on the right. Odds are I am going to need a new transfer case im sure but im not sure which one i have, the numbers i find on it bring up a couple different ones. I dont mind going back to the original one but not sure what the original one was. 5875E317 is the one in it and has an overhaule date of 4/82 which is much older than the truck.
Any help/Info would be greatly appreciated. I attached a couple pictures of the transfer case. Thanks
Attachments
-
76.9 KB Views: 21
-
58.6 KB Views: 13