Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Drier is completely bypassed, compressor pumps straight into wet tank, still 30 psiSee if this helps. Go to the air dryer and take off the spin on filter. Reach in where the filter came off there will be a cardboard looking tube. Take this out and then screw the cartridge back on.
Just sent him a few dollars via PayPal for fuel.Is there a simp5782 fund to help offset some of these recovery costs?
Sent from my iPhone using Tapatalk
Thanks warren. That means more of my junk pile parts for you!Just sent him a few dollars via PayPal for fuel.
Gas powered compressors were more than i offered to come get him for. Plus air lines and fittings. Even a small 110 and a generator was even more at harbor freight .That was very polite. Simp and I trade jabs, but in good spirit. He has touched every fastener on A1 series 923’s.
In this case, I would have pumped in air from an external source, such as a rental gasoline powered air compressor in the bed, or a 12v one running non-stop if the truck is relatively leak-free. Do as much slowing as possible via downshifting.
Hey Simp send me your paypal to jetoneusaf@gmail.com id like to kick in a few bucks for your TOW SERVICE , I believe firmly in KARMA , serious , that could have been me so easily , experienced a "NO BUILD AIR "problem a few weeks ago Air dryer valve wouldn't seal, temp fixed it with a socket, pair of vice grips and some zip ties to get home seriously, please send it ANDY
Easy now his head might not fit in his truck any more. Naw Wes is A1, dang Energizer bunny, good show Simp.And that's the kind of guy Wes is, he'd give another member the shirt off of his back without having to ask for it.
Definitely the guy I'd want by my side in a crisis/critical situation.
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!