gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Ha!
That's like buying a lottery ticket and thinking you won...
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M925a2 Power Surge
- Thread starter 74M35A2
- Start date
That's like buying a lottery ticket and thinking you won...
74M35A2
Well-known member
- 4,145
- 330
- 83
- Location
- Livonia, MI
Solar almost done. Then dog bone links, both rear axles are held in place with ratchet straps right now. Probably not very conducive to receiving 400hp. Then engine swap. Hold tight.
- 2,664
- 2,200
- 113
- Location
- Sunman Indiana
Nah, just jealous of his engine swap, solar project and pic of the tasty Hawaiian beverage.
I have a truck with a trashed motor, around 10,000 sq ft or roof I’d love to load up with panels and hopefully make it to Hawaii in a few years to do some sampling, but wont be getting paid to do it.
74M35A2
Well-known member
- 4,145
- 330
- 83
- Location
- Livonia, MI
Don’t lighten up, the weak are killed and eaten. Don’t be jealous of 3 broken torque link rod ends, you’ll have them also.
74M35A2
Well-known member
- 4,145
- 330
- 83
- Location
- Livonia, MI
This morning:
- 1,394
- 178
- 63
- Location
- Frisco Texas
Well, he took a picture of it.
Progress.
Progress.
- 8,539
- 2,758
- 113
- Location
- Monrovia, Ca.
He really DOES have a truck! Wait....could be a stolen pic from the interwebs....
- 1,394
- 178
- 63
- Location
- Frisco Texas
I suspect it’s just recon. Further plans to be made after morning debrief.
- 1,450
- 120
- 63
- Location
- Gray, GA
74M35A2
Well-known member
- 4,145
- 330
- 83
- Location
- Livonia, MI
Solar done. Torque link ends drilled and tapped. Once installed, then motor swap.
- 1,394
- 178
- 63
- Location
- Frisco Texas
The relationship of the speed of motor swaps compared to the condition roofs in the background photos seems to be directly unproportional in some way. (Simp vs 74’) ownership of said roofs not withstanding.
Coincidence? I think not.
Thats all all I got this morning. Carry on gentlemen.
Coincidence? I think not.
Thats all all I got this morning. Carry on gentlemen.
- 2,664
- 2,200
- 113
- Location
- Sunman Indiana
Ha! I was going to say the siding on that shed could use some attention, but was afraid it might throw a wrench in the progress on the truck.
Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
Hey what gives? I don't see a rear window in that top.
Sent from my SM-G930V using Tapatalk
- 1,394
- 178
- 63
- Location
- Frisco Texas
low priority item.
74M35A2
Well-known member
- 4,145
- 330
- 83
- Location
- Livonia, MI
Solar done. Torque rod link ends next, then motor. Ever seen an electric meter run backwards?
- 8,539
- 2,758
- 113
- Location
- Monrovia, Ca.
I have seen an ENGINE run backwards. When was the last time you saw your engine run, forward, backward, at all?? 
Just poking you with a stick!!
Just poking you with a stick!!
- 1,394
- 178
- 63
- Location
- Frisco Texas
Will beat me to the joke. I would have phrased it different, but the effect was identical.
Props.
Props.
- 2,664
- 2,200
- 113
- Location
- Sunman Indiana
It’s a good thing they don’t put the shiny little wheel that spins on the meters any more, he’d never get anything else done...
74M35A2
Well-known member
- 4,145
- 330
- 83
- Location
- Livonia, MI
So, ummmm, let’s see how many people I can make mad. I just had a Cummins ISX 15L engine land in my lap. Anybody have an M939a1 or first gen front engine mount frame cross-member, rear mounts, and doghouse (both for NHC-250)?
I’ll probably still go ahead with the ISL-400/13 speed since it is already done, together, and converted to 24v. I don’t think the Eaton/Fuller RTO-12513 trans would be up to 2,200ft-lb of torque, it is rated at half of that. But if I kept the truck unloaded and was nice to it.... I’d have to drive it to the GA ralley just to give everybody the business...
I’ll probably still go ahead with the ISL-400/13 speed since it is already done, together, and converted to 24v. I don’t think the Eaton/Fuller RTO-12513 trans would be up to 2,200ft-lb of torque, it is rated at half of that. But if I kept the truck unloaded and was nice to it.... I’d have to drive it to the GA ralley just to give everybody the business...
- 2,664
- 2,200
- 113
- Location
- Sunman Indiana
Sweeeet! Motor for your trailer??? All you need is a hefty auto, an on off switch for a throttle...