M929 Splash Guards

[Augdog1964]

Hey all,

Just picked up an M929A1 dump truck out of Indy, and it had really short splash guards installed, not the original long ones that can be rolled up.

Does anyone know where I can get a set of the long splash guards? Could also use the attaching hardware!

Thanks in Advance!

 

[Tow4]

I guess you mean mud flaps? I have some I can measure if you need to know the length.

 

[wreckerman893]

The reason they have the short ones is to keep from running over them when backing up. The longer ones had a way to hook them up to avoid the same situation.

 

[Augdog1964]

Ok, yes mud flaps...

The ones that came on the truck are so short that when driving they curl in toward the tire and ride up onto the tire surface, rubbing the entire time. I need the ones in the picture.

 

[Tow4]

Here are some pictures of the mud flap and mounting hardware. I also included a drawing of the mud flap so you can make them if you can't find them. The drawing dimensions are in INCHES.

Good luck.

 

[insanejecke]

Splash Guards lol. You talk funny. That's the mane reason I looked at this; Too see what you were talking about.

 

[Augdog1964]

Sorry, in this part of the country we've always called them splash guards... I've heard them called mud flaps, but splash guards are what most people around here would say...

 

[quickfarms]

Go to a truck parts house ,dealer or truck stop and tell them the size you need. They are very common, mud flaps get torn all the time and the cops like to ticket the trucks, just try to get the thick ones. If I remember correctly the bottom has to be within 6" of the ground per DOT regs.