• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M931A2 PCB Rebuild Help

Lantzj22

Member
29
30
13
Location
Albuquerque
Good Morning/Afternoon/evening everyone!
I went ahead and got 2 more 5 tons to add to my beach fleet. (This may have become an addiction but thats not the topic today). I have a PCB box that i believe is the problem. It had water intrusion for sure. I pulled it apart and it has 2 solenoids and 1 circuit board. My question is mostly this, I see alot of boxes being rebuilt with no boards. Can I remove that board and wire the solenoids accordingly or am i risking damage to the truck? Also, why would some trucks have this and many dont? Thanks for the help yall!
 

juanprado

Well-known member
Steel Soldiers Supporter
5,721
3,137
113
Location
Metairie/La (N'awlins)
Check this thread

Board is for reverse polarity protection if I recall and not needed. Was not on the original models or a1 .
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks