M936 Wrecker shipping weight?

[WildernessJeep]

I'm trying to ship an M936, and have some really, really, really good rates (I'd think it would almost cost that in fuel). Regardless, I don't want to get slapped with a "not as described" fee from the shipper if the truck weighs more than the auction site posted. The listed weight on the auction website is 36,860 pounds for a 1984 M936 Wrecker, still mostly intact. I've seen weight ranges from 36K to 45K. That's a big change. Does anyone have an actual or more accurate weight guess for this truck?

 

[simp5782]

40k with the bii kit.
Anything 35 to 45k will be in the same cost range. It can go on a stepdeck if they have good ramps. Expect 3 to 3.75 a mile

 

[M35A2-AZ]

My M936 with all the BII in it is right at 39,500lbs.

 

[WildernessJeep]

What's a bii kit? Basic issue, idiot?

 

[simp5782]

What's a bii kit? Basic issue, idiot?

Basic issue items.

Snatch blocks, ground spades, chains, boom jacks and pads, other crap

 

[M35A2-AZ]

This is just part of the BII that goes in the wrecker. A list of it is in the manual.

 

[WildernessJeep]

This is just part of the BII that goes in the wrecker. A list of it is in the manual.

Is there anywhere to put a genset or welder behind the cab?

 

[simp5782]

You could fit a hydraulic welder pretty easy as even a 225 stick is pretty small. An 802 genset is a pretty small unit as well

 

[M35A2-AZ]

Is there anywhere to put a genset or welder behind the cab?

Not much room behind the cab, spare tire and tool boxes are there.

 

[1 Patriot-of-many]

Doubtful you will get any of the kit, unless it's listed by the seller.

 

[rumplecat]

My 936A2 crossed the scales at just below 42,000 lbs. with min. kit on board!