M988 lights won't work

[Formansr]

I started my M988 this evening and turned the lights on - about 3-4 minutes later they went out and none of them work now. The engine will turn off and start just fine but no lights work - even break lights.

Any ideas?

 

[swbradley1]

I moved this to the correct forum.

 

[NDT]

Assuming you are asking about a M998. Turn the light switch off for 10 minutes, then turn back on. If the light come on for a moment and then go off again, there could be a short circuit in the lighting somewhere that is causing the light switch's internal circuit breaker to trip. If all lights are dead as a doornail, the light switch may have failed.