• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M997A2 Compressor Connection

Southerneze

Member
37
28
18
Location
Knoxville Tn
Need a little help here. We have installed a new 2 wire AC compressor and all works well by connecting a jumper hot wire as we do not have a clue where the the hot is supposed to come from. Any help would be greatly appreciated. Thanks
20230222_104205.jpeg
 

AAVP7

Well-known member
217
262
63
Location
Dortmund, Germany
In addition to Steve´s help: On the vehicle, there´s a wire loom running down the bulkhead behind the commander´s seat. This wire loom disappears into the underworld to the left of the commander´s left leg (together with the refrigerant lines). Underneath the Humvee, this wire loom should have one wire going to the small electrical diesel pump, and one wire going forward along the starter, and then going up at the right front of the engine. Maybe follow this path, then hopefully, you´ll find the wire.
Mine was cut off at some point, however, but thanks to a fellow Steelsoldiers member, I was able to source the missing bit of wire loom.
 
Last edited:
Top