Iambiig
Member
- 68
- 22
- 8
- Location
- Jackson, New Jersey
It is a 1993/1994 M998 with a 3L80 trans that will not shift into any gear. It used to sometimes take a minute after start up to shift, now it does not go into any gear at all. Almost felt like it had to build up pressure or vacuum when first started.
Fluid is a pretty pink, no leaks underneath. Filter was changed last year, had a little sludge, but nothing extreme.
Is this the symptom of failed modulator?
Any help would be appreciated.
Fluid is a pretty pink, no leaks underneath. Filter was changed last year, had a little sludge, but nothing extreme.
Is this the symptom of failed modulator?
Any help would be appreciated.