m998/m1102 camping with kids atv and motocross

[bflysure]

m998/m1102 trans help ?

new purchase and new to the forum. Hello everyone.... i bought a 1998 m998 and a 2009 m1102 trailer. I am trying to make this setup highway worthy to pull mx bikes and atv with kids for camping. at least 70 with no stress to the system. I found a new company that is offering turbo add ons in the next 6 months for the 6.5na (still under development) since whipple supercharger no longer an option. I am looking to load this with 3 motocross bikes and 2 atv (kids size). i already know how to stage.

what i cant figure out is upgrading the trans in the the EASIEST way possible. i am not looking for holeshot strength but the easiest plug and play option to upgrade the 3 gear dinosaur. something that wont stress motor at 70mph.

I appreciate your time and forgive me if this was covered previously

"fight like **** to keep the wolves away"

 

[TNriverjet]

Welcome aboard. I’m sure a lot of your questions can be answered when you get a chance to do some reading in the HMMWV section. Keep us posted with photos as you build the rig.

 

[desmodromic]

4L80e

 

[SCM35A2]

Nice, welcome to the site.

 

[twisted60]

Welcome from South Florida, nice set up on the trailer.

 

[Wire Fox]

For "easy," I'd do the 4L80E with an aftermarket shift computer. It's still not easy, but there is certainly less wires and sensors to put together that way.

Sent from my SM-G530T using Tapatalk

 

[infidel got me]

Speed and easy is not cheap.

Speed, easy and reliable-- I'd go with a 700r4.

That's what I'm putting in mine within a few months.

R & r the old in with the new-- no driveshaft/cross member mess..

The best thing is no 4l80 computer that will leave you stuck and poor

 

[Dock Rocker]

Speed and easy is not cheap.

Speed, easy and reliable-- I'd go with a 700r4.

That's what I'm putting in mine within a few months.

R & r the old in with the new-- no driveshaft/cross member mess..

The best thing is no 4l80 computer that will leave you stuck and poor

Have you sourced the TV / kickckdown cable bracket for any of the Diesel engines? I am looking for one as we speak.


Sent from my iPhone using Tapatalk

 

[infidel got me]

I'm going with the patc 700 r4 kit. I have also looked for the diesel kick down bracket with no luck

 

[bflysure]

does anyone know who can do the 4l80e swap south of milwaukee and north of chicago???