LT67
Well-known member
- 655
- 502
- 93
- Location
- Bowdon, GA
Yes
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Max tire size for stock M1008
- Thread starter rdragoo
- Start date
vanaisa
Well-known member
- 266
- 355
- 63
- Location
- Tallinn, Estonia
Here is helpful calculator:
tiresize.com
Tire Size Calculator
The best tire size calculator. Use our tire size calculator to find tire size specs and suggested tire sizes. Then check prices for all available tire sizes.
Dillard88
New member
- 14
- 12
- 3
- Location
- ATHENS, GA
good deal
I wanted to keep the stock look for my first set so I went with the 235s. I’ll be looking to step next set
LT67
Well-known member
- 655
- 502
- 93
- Location
- Bowdon, GA
Just be aware of the advertised specs for each brand within the same size. I run BFG KM2 and they were right at 33.3in mounted. My Toyo MT were 33.5 mounted. If it's going to be an all terrain type tire, they will be a lil shorter.
Keith_J
Well-known member
- 3,657
- 1,323
- 113
- Location
- Schertz TX
Change in tire size will impact speedometer accuracy, larger tires will make actual speed higher than indicated.
You can change the drive gear to compensate. First, make sure the speedometer is correctly nulled, this is the needle at the zero mark with the truck stopped. The needle is only a friction fit on the shaft and it can be carefully adjusted with the dash removed. This will not change odometer calibration.
Once nulled, test over a measured mile at 30 MPH indicated, 2 minutes is the time. Adjust accordingly.
You can change the drive gear to compensate. First, make sure the speedometer is correctly nulled, this is the needle at the zero mark with the truck stopped. The needle is only a friction fit on the shaft and it can be carefully adjusted with the dash removed. This will not change odometer calibration.
Once nulled, test over a measured mile at 30 MPH indicated, 2 minutes is the time. Adjust accordingly.