• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEP-002A flywheel access

Speddmon

Blind squirrel rehabiltator
Super Moderator
Steel Soldiers Supporter
4,640
28
38
Location
Cambridge, Ohio
There is supposed to be an access window and pointer on the side of the bell housing on the opposite side from the starter.
 

jbk

Member
404
5
16
Location
livingston la.
remove the plastic center plug on the front grill insert 1/2 inch socket and rotate clockwise to bring it into veiw on the flywheel.
 

epitts

Member
500
1
18
Location
Terre Haute, Indiana
There is supposed to be an access window and pointer on the side of the bell housing on the opposite side from the starter.
[ QUOTE" remove the plastic center plug on the front grill insert 1/2 inch socket and rotate clockwise to bring it into veiw on the flywheel.
I found the window with the pointer, now I will look for the plastic plug.

Thanks for the help
 

Speddmon

Blind squirrel rehabiltator
Super Moderator
Steel Soldiers Supporter
4,640
28
38
Location
Cambridge, Ohio
You may not have the plastic plug. The hole referred to is on the cover for the cooling fan on the "Front" of the generator set (Front being the end of the enging opposite of the control panel, I know it's backwards, but that's what the TM designates as the front)
 

epitts

Member
500
1
18
Location
Terre Haute, Indiana
Blower cover

I did not think of the fan nut. Was not sure it was strong enough to turn the engine over. Will give it a try. Sorry for all the FNG questions, always learning somthing new.

Thanks
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks