MEP-003A Oil Pump GPH?

[snypr]

Does anyone know the GPH of oil that is pumped by the MEP-003a pump, assuming that all is functionally/operationally intact? Ive peaked over TMs & tried my googlefu to no joy. If I have missed it, I apologize & will take my lumps accordingly...

Thanks guys.

 

[rustystud]

Does anyone know the GPH of oil that is pumped by the MEP-003a pump, assuming that all is functionally/operationally intact? Ive peaked over TMs & tried my googlefu to no joy. If I have missed it, I apologize & will take my lumps accordingly...

Thanks guys.

Are you trying to make something out of one ?

 

[snypr]

I am actually thinking of using a centrifugal oil filter, instead of the cartridge type and was looking at matching up specs with pressure and flow rate..

 

[Isaac-1]

As a bit of side information

One of our members (Speddmon) offers / offered a spin on conversion kit, that works with a common Fram filter, I don't have the number off hand, but think it is a PF-8A. I have one on my MEP-003a and it is a lot easier than dealing with the canister filters.

The civilian version of Onan DJC uses a full flow oil filter from NAPA is a 1084, WIX 51084 also the heavy duty version the NAPA1452, not sure what else

 

[snypr]

Thank you Isaac-1.
Has anyone done or converted their oil system to a centrifugal type cleaner, instead of regular or OEM filter?

 

[Isaac-1]

I have not heard of anyone doing it

 

[rustystud]

I don't think you will have the pressure or volume needed to make a centrifugal system work. I also have the spin-on conversion system on all my MEP-002A and MEP-003A generators.