MEP-003A

[truckfest]

I cannot find a new oil filter canister gasket for the Onan Diesel. Am almost to the point of having them made. Would like to find a parts manual for the MEP-003A. Any help would be greatly appreciates. First post, hope it's ok.

Thanks,
Jeff

 

[LanceRobson]

Onan is pretty proud of their parts when it comes to pricing them but they usually do a good job of keeping them in stock.

I'd suggest getting the model and specification info off the engine (if available) and calling or emailing them. If that info is not available (and my brain cell recalls correctly) they have military products contact link on their main website.

Lance

 

[LibertyDeuce]

Jeff
I have manuals for your MEP-003A. Tell me where you want them sent to.
Josh

 

[papercu]

Welcome, The gasket should be with the filter. This is the info I have, hope it helps. Wayne

Gasket, oil filter assembly NSN is 5330-01-200-4808 part number 102940 (Manufacturer code 73370 Fram Corp)
Oil Filter: NAPA 1004, Wix 202 C, Fram CH6PL, military p/n MS35802-2
NSN 2940-00-580-6304

 

[CGarbee]

I purchased a set of manuals on CD a while back that seems to cover every one from the 1.5kw 28v units on up to the 200kw 110/220/440 units made up through the early nineties... I want to say that I purchased it from Military-Media, but I'd have to pull it out and look... It was around $20...

Welcome to the site.

 

[peyton]

I cannot find a new oil filter canister gasket for the Onan Diesel. Am almost to the point of having them made. Would like to find a parts manual for the MEP-003A. Any help would be greatly appreciates. First post, hope it's ok.

Thanks,
Jeff

Jeff, the manuals can be downloaded and are in the tech manuals section; look under resources. The manuals are TM5-6115-585-12 and TM5-6115-585-34. I thought the -24p was there as well but didn't see it.

If you can't find the gasket, RTV should work.

Peyton

 

[groundog]

I understand that the napa gasket is wrong---does the Fram filter have the right gasket?

 

[peyton]

Welcome, The gasket should be with the filter. This is the info I have, hope it helps. Wayne

Gasket, oil filter assembly NSN is 5330-01-200-4808 part number 102940 (Manufacturer code 73370 Fram Corp)
Oil Filter: NAPA 1004, Wix 202 C, Fram CH6PL, military p/n MS35802-2
NSN 2940-00-580-6304

Which filter (brand, number) is shown in your picture? Thanks

Peyton

 

[papercu]

filter

Which filter (brand, number) is shown in your picture?

First, my info is for reference only. I cannot say which/any filters will fit your equipment.

The filter shown is a WIX 51004

Height: 4.809
Outer Diameter: 3.984
Inner Diameter: 0.765
Nominal Micron Rating: 24

Gasket Number: 15090, O.D.: 4.955, I.D.: 4.400, Thk.: 0.062

 

[truckfest]

RE: filter

Thanks to all! I do have a WIX51004 filter, it does have a flat gasket, the onan takes a "square o ring"type gasket.WIX tells me the WIXPC202 is no longer a good number and to use the51004. The NAPA1004 is made by WIX ,i do not know what type of gasket it comes with.Does anyone know if the NAPA or the FRAM CH6PL has the correct one?I did talk to someone from cummins [i understand cummins owns onan]they need a part number for the gasket.thanks again ,jeff

 

[Bill W]

RE: filter

The NAPA base gasket does not work

 

[papercu]

gasket

onan]they need a part number for the gasket.

This is from the TM,
Gasket, oil filter assembly NSN is 5330-01-200-4808 part number 102940 and you csn try this one 122-0404
BTW If you do get a correct maker/number be sure to post it in the Parts Cross Reference section under the Resources tab. Wayne