KLChurch
New member
- 475
- 2
- 0
- Location
- Montgomery/TX
S7 in run mode
The only terminals hot is #8 and #11
All the rest cold. Checked them all.
Kris
The only terminals hot is #8 and #11
All the rest cold. Checked them all.
Kris
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Push in CB1.Bench tested the two A4 relays to be OK
Kris
Did you test from ground to Pin A for 24 volts in the run position, and then from pin B to ground, OHMS position for the meter?I remembered that A1 has + and - terminals so I tested in Run and Stop modes.
No 24 VCD either position.
Kris
Bad habit. We will just call it run configuration now, or start configuration.No K1 click
24 VDC at TB1-10 in run mode.
By the way, why do you keep me pushing CB1? It never is out.
Kris