jvillescrub
New member
- 4
- 0
- 0
- Location
- United States jacksonville nc
Hey guys new here, glad I found the site!
First I got 2 units from a local guy, one is a mep 005 and the other is a 006 on a dual axle trailer
The 005 only has 1400 hours and was used by a township, and when I tried to start the fuel pumps would not come on, and the overspeed light worn reset. Then pumps are good, i checked. and i pushed the small button on the speed sensor, but no go. Also i took the day tank off and cleaned out. Any ideas?
On the 006, one fuel pump is bad one is pumping, and i can hear it come one when i put the switch on, but wont start. Also the transducer? has some black gunk dripping out, wonder if its burnt? Thanks for any info!
First I got 2 units from a local guy, one is a mep 005 and the other is a 006 on a dual axle trailer
The 005 only has 1400 hours and was used by a township, and when I tried to start the fuel pumps would not come on, and the overspeed light worn reset. Then pumps are good, i checked. and i pushed the small button on the speed sensor, but no go. Also i took the day tank off and cleaned out. Any ideas?
On the 006, one fuel pump is bad one is pumping, and i can hear it come one when i put the switch on, but wont start. Also the transducer? has some black gunk dripping out, wonder if its burnt? Thanks for any info!