Denny,
Slow down.
Some of us live 6 or 7 time zones away. Do you have the TM's? If not, download them from the SS TM Forum. If so, the troubleshooting diagram will lead you through a very simple test procedure. First, find A-2 the Frequency Transducer. Its in the control panel. On both sides of it, are two wires, hooked to a TB, (terminal Board). One side is labeled 1 and 2, and the other is labeled + and -. Start the set. Get it up to running speed. Measure, ( hope you have a multimeter) at wire 1 and 2, for 120 volts, AC or thereabouts. If you have 120, then measure at wires + and -, but for DC voltage. I cant remember how much, look it up. I am currently working from a computer without my manuals uploaded. If you have 120, AC in, on the A-2 and no DC voltage out, the A-2 is bad. If you have DC out, and the meter doesn't move, beat it once or twice with your fist, and if that doesn't help, get a new meter.