• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEP-006A help identify modification

Suprman

Well-known member
Supporting Vendor
6,861
696
113
Location
Stratford/Connecticut
I have a MEP-006A it has an odd setup installed. There are extra oil lines and coolant lines, there is some type of agitator or pump mounted on the oil pan and there is some housing on the gen with an opening on the front right. Anyone know anything about this?
Will
IMG_6449.jpgIMG_6450.jpg
 

Suprman

Well-known member
Supporting Vendor
6,861
696
113
Location
Stratford/Connecticut
The tube part may be some type of filter housing. There is no heater part to it. The bottom of the first pic is a small electric motor going into the oil pan.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks