• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEP 006A no juice lug side

Powermaker16

New member
12
3
3
Location
Charleston, SC
Hey Gentlemen,

I have a mep 006a that seems to have power on the left side of this unknown box (pics below) but no power on the right side. Any ideas?
Second issue is the injection pump is allowing fuel into oil. Previous thread said to make sure the two leather seals are installed correctly. Any diagrams IMG_8937.jpegIMG_8939.jpegon how that’s should be?
Thanks! IMG_8938.jpeg
 

Scoobyshep

Well-known member
1,298
1,942
113
Location
Florida
First thing, you are better using a meter the hot sticks are terrible liars. the unknown box is the output contactor (think electrically controlled circuit breaker). On the console did you flip the switch to close? there are a few different things that can keep it open. also any fault lights?
 

Powermaker16

New member
12
3
3
Location
Charleston, SC
I have a meter. Did not get a reading on lug side. It was just easier to show in pics using hot stick. I didn’t t measure left side, can do tomorrow. I did push the switch to closed position and open. Tried both ways just to check, but still no power lug side.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks