• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEP-802a & 803a

Guyfang

Moderator
Staff member
Moderator
16,938
24,617
113
Location
Burgkunstadt, Germany
If you were in the army, you know what a PMCS is. Do it. If you were not in the army, read the operators manual, TM 9-6115-642-10. Do the before operation checks. There will be more then enough guys jumping in here to guide you through this. Its not rocket science. Don't worry.
 

CapePrep

Active member
267
196
43
Location
MA
Thank you Guy, I will go thru the manual and listen to some other help that comes along here! Looking forward to getting this generator up and running.
 

jamawieb

Well-known member
1,435
557
113
Location
Ripley/TN
Change the filters and fluids, then hit the dead crank switch to crank for 30 seconds to get oil up to the upper level of the motor. Finally crank.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks