• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEP-803a load testing

loca5790

New member
16
16
3
Location
NC
Well I was wondering what to test my 802a with.... have an old hot water heater but also have an old stove. You may have inspired me.
 

m32825

Active member
224
170
43
Location
Central Florida
Well I was wondering what to test my 802a with.... have an old hot water heater but also have an old stove. You may have inspired me.
I put the same connector on it as the generator inlet for the house, makes it easy to connect, also tests my cable. The stove is nice because burners give you nice, stepped loads. Once everything gets hot the elements will cycle, giving you some dynamic load.
 

Light in the Dark

Well-known member
Steel Soldiers Supporter
3,829
5,944
113
Location
MA
Just don't give it the filling test :oops:

 
Just don't give it the filling test :oops:

Hilarious... I can't stop laughing
 

Guyfang

Moderator
Staff member
Moderator
16,766
24,082
113
Location
Burgkunstadt, Germany
Just don't give it the filling test :oops:




You know, I did this when I was about 14 years old. I was hot wiring up a hidden phone in my bedroom. Kept it hidden in my messy closet. I wanted to strip the wire and hook them to the phone. As I started to pull, someone called. Brothers, I peed my pants. This was the first, but not LAST time I gave myself a jolt in the last 70 years.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks