• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEP 803A Sub Tank

Daybreak

2 Star Admiral
Steel Soldiers Supporter
1,522
771
113
Location
Va
Howdy,
Browse thru the forums.
A 55 gallon drum works good. With you being in Miami. Look over the various ways for moisture collection. A sealed drum with expansion, and filters, with desiccant breather.

I am sure some of the other Florida members can chime in with what they are using.

Also, don't forget about storage time. 55 gallons of fuel with additives for storage. Will you use 55 gallons or more a year? If not, look over the different chemicals for storage and algae.
 

fpchief

Well-known member
1,041
220
63
Location
South Alabama
I am about to do the same thing but not a drum. Looks like shit and want to leave it near the generator house which is in view of the road. I had hernia surgery one week before this last storm and my wife and two girls were out there trying to lift the Scepter fuel cans to refuel. Have to figure something out. I have a fuel tank off a 5 ton that I may try to use. Lots of posts in here about it....
 

Scoobyshep

Well-known member
1,137
1,511
113
Location
Florida
Me personally i stick with 6 gallon cans (easier to go get fuel) but if you need a larger tank, Northern tool, Tractor supply, and blanes are places I would look.
 

Lovetofix

Member
87
63
18
Location
Morrison,TN
The OP asked if anyone else built a base tank. I don’t know how to link a thread but just search this topic from another member a few months back.

“MEP-803A - Fuel lines for stationary sub-base fuel tank”

Also some good info in this thread:

“Generator AUX fuel Tank”

Sent from my iPhone using Tapatalk
 

Guyfang

Moderator
Staff member
Moderator
16,767
24,082
113
Location
Burgkunstadt, Germany
I am about to do the same thing but not a drum. Looks like shit and want to leave it near the generator house which is in view of the road. I had hernia surgery one week before this last storm and my wife and two girls were out there trying to lift the Scepter fuel cans to refuel. Have to figure something out. I have a fuel tank off a 5 ton that I may try to use. Lots of posts in here about it....
Its what we did. % ton tank, with a platform to sit on, with casters. Worked great. I seem to remember that we took a fuel tank level sender, off a MEP-oo3A and screwed it into the tank. Adjusted it for the amount of fuel in the tank, and it worked like a charm.
 

fpchief

Well-known member
1,041
220
63
Location
South Alabama
Its what we did. % ton tank, with a platform to sit on, with casters. Worked great. I seem to remember that we took a fuel tank level sender, off a MEP-oo3A and screwed it into the tank. Adjusted it for the amount of fuel in the tank, and it worked like a charm.
Nice...i like the casters! I have even considered putting a small in ground tank next to it but unsure about the ability to draw the fuel up. I got some research to do before I get serious. Will probably put it off and next hurricane season wish I did it .
 

Ray70

Well-known member
2,595
5,912
113
Location
West greenwich/RI
A couple years ago I had a customer that had found a 200ish. gl tank trailer in Texas and shipped it to RI. It appeared to be Ex-military.
I was a steel box about 4' x 6' by about 8" or 10" deep. basically a tank on wheels.
It had a fuel level gage , dip tube and return / vent fittings.
Mounted an 802 on it with a filtration system and painted it all 383 green.
He could tow it around his property or take it on the road if a family member needed power and had plenty of fuel on-board!
His intention was to use it on his property as supplemental power for an off-grid home.
That is probably too big of a tank for just stand-by power but he intended to run it ALOT.
 

Ray70

Well-known member
2,595
5,912
113
Location
West greenwich/RI
Off the subject Chief, how's your surgery recovery going? I'm going under the knife next Monday the 9th for bi-lateral hernia surgery.
Doc says no lifting more than 25 lbs. for 6 weeks! Like that's gonna be possible!
I had foot surgery like 10 years ago and was outside in the snow that afternoon, on crutches prepping to install one of those Roth double wall fuel oil tanks in the basement.
 

Zed254

Well-known member
866
466
63
Location
S. Hampton Roads, VA

jmenende

Well-known member
467
389
63
Location
Puerto Rico
Thanks for the ideas guys. I need a subtank cause the issue is space. I have my 803a in a shed and dont have the space for a drum.
 

fpchief

Well-known member
1,041
220
63
Location
South Alabama
Off the subject Chief, how's your surgery recovery going? I'm going under the knife next Monday the 9th for bi-lateral hernia surgery.
Doc says no lifting more than 25 lbs. for 6 weeks! Like that's gonna be possible!
I had foot surgery like 10 years ago and was outside in the snow that afternoon, on crutches prepping to install one of those Roth double wall fuel oil tanks in the basement.
I had mine on the 16th. It is the hernia where they cut me from belly button north about 5". I am extremely active with the trucks and on the land...almost OCD about getting things done daily. I was told 4 weeks for no lifting etc. And I do agree it will be at least that long. I assisted in doing some small limb cleaning post storm today and wish I didnt do that. I do have a gut so that is 100% part of my slow recovery. Riding in cars is not fun either. I was told hernia surgery is no big deal, well there may be a difference between WHERE it is, but for me, this one is getting me down. Do what the doc says, I took the pain pills for the first two days and felt like shit...any cutting on your core is gonna suck. I hope you have a quick recovery!!
 

Guyfang

Moderator
Staff member
Moderator
16,767
24,082
113
Location
Burgkunstadt, Germany
You two knuckle heads need to take better care of your body's. You are going to end up limping and groaning, and looking like old men, way before your time. If I knew back in the day, what I would feel like now, I sure as hel* would have treated my body better. If the man tells you no lifting, then its sound advice to follow. This is advice I sure wish I had followed. Saith an old limping, groaning, pain wracked Southern Gentleman.
 

fpchief

Well-known member
1,041
220
63
Location
South Alabama
You two knuckle heads need to take better care of your body's. You are going to end up limping and groaning, and looking like old men, way before your time. If I knew back in the day, what I would feel like now, I sure as hel* would have treated my body better. If the man tells you no lifting, then its sound advice to follow. This is advice I sure wish I had followed. Saith an old limping, groaning, pain wracked Southern Gentleman.
Wise words! And I know exactly when my hernia(s) got worse.....putting 53's on my M923a2 Rims. All to save $400. That is what it would cost to have the tire place come to my house and do it. Will be making better choices from now on.
 

uniquify

Active member
228
223
43
Location
Sioux Falls, SD
Here's a possible prefab option. I haven't tried this personally, and it seems expensive, but the dimensions seem fairly close:
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks