TheYachtCaptain
New member
- 8
- 0
- 0
- Location
- Hoodsport, WA
Good day from Hoodsport, WA.,
On my first startup attempt, the engine ran for 2 seconds then shut down. There was fuel pouring from a wire connection on the Electric Actuator. I figure this is not normal
and likely my problem. Notable: It looks like this part has been replaced before.
Here is my question for you fine folks. Did I do something to provoke this? Any other advice?
I will look for the part tonight.
Other interesting facts, there were many other wires, plugs, and relays disconnected. Perhaps I missed one, could this be the cause? I figured this was done at random during decommissioning. Thoughts?
![IMG_4268.jpg IMG_4268.jpg](https://www.steelsoldiers.com/data/attachments/506/506310-d2ab6f29b5ab83f828c46d1bb3f9ad43.jpg)
On my first startup attempt, the engine ran for 2 seconds then shut down. There was fuel pouring from a wire connection on the Electric Actuator. I figure this is not normal
![Wink ;-) ;-)](https://www.steelsoldiers.com/images/smilies/icon_wink.gif)
Here is my question for you fine folks. Did I do something to provoke this? Any other advice?
I will look for the part tonight.
Other interesting facts, there were many other wires, plugs, and relays disconnected. Perhaps I missed one, could this be the cause? I figured this was done at random during decommissioning. Thoughts?
![IMG_4268.jpg IMG_4268.jpg](https://www.steelsoldiers.com/data/attachments/506/506310-d2ab6f29b5ab83f828c46d1bb3f9ad43.jpg)