I tested the voltage to the fault indicator per the manual. No voltage - the manual states to replace the fault indicator if no voltage is found. Should be between 20-34 volts. I found one on e-bay for $70. It's on the way. I hope that will fix it. Question - Would there be any reason that someone would disable the fault indicator??? Also there is a plug on the right front of the generator that is labeled generator start. It is a multiple pin plug with each pin lettered a,b.c,d, etc. Is this a remote start plug or something else????
Does anyone know if the extra pin plug would cause problems for the fault indicator??? Seaching for answers - thanx