MEP003A battery cables

[Vic_949]

So I just got a starter for my MEP003A but I have no battery cables can someone send me a link we’re to get the battery cables witch wire is (P55y2N] and what wire is p55B 10 how many battery cables do I need help. Thx

 

[Vic_949]

Starter

 

[Vic_949]

Starter

Also I need to know what wire is BT2- thanks

 

[Guyfang]

The cable BT1+ Is the Positive cable from the starter to first Battery. BT2- is the cable from the starter to the neg side of the second battery. Both cables seem to not be there. Attached below is cable hook up.

 

[Guyfang]

BT1 is #9 in this picture. BT2 is #5 in this picture

The TM tells you what parts you need to make them.

 

[Vic_949]

BT1 is #9 in this picture. BT2 is #5 in this picture

The TM tells you what parts you need to make them.

I know that I just want to know what is p55Y2n that the diagram of the starter you showed me does that mean I need another negative battery cable or ground what cable connect to that.

 

[Vic_949]

I know that I just want to know what is p55Y2n that the diagram of the starter you showed me does that mean I need another negative battery cable or ground what cable connect to that.

 

[Ray70]

Did your other 2 posts regarding your battery wire issue get deleted? Looks like they are both gone.
You can't see the Positive post on the starter in this picture, but maybe it will help show the battery, slave port and control box feed wires. At least you can see the negative side... positive side is similar.

 

[Vic_949]

Did your other 2 posts regarding your battery wire issue get deleted? Looks like they are both gone.
You can't see the Positive post on the starter in this picture, but maybe it will help show the battery, slave port and control box feed wires. At least you can see the negative side... positive side is similar.
View attachment 891987

Ok thx

 

[Ray70]

P55Y2N should be one of the fat white wires. It's the negative that goes over to the slave port on the front of the frame.
In my picture above it's the wire with the faded yellow ring terminal attached under the negative battery wire, ten it goes down behind the fuel tank and over to the slave port.

 

[Vic_949]

P55Y2N should be one of the fat white wires. It's the negative that goes over to the slave port on the front of the frame.
In my picture above it's the wire with the faded yellow ring terminal attached under the negative battery wire, ten it goes down behind the fuel tank and over to the slave port.

Mine doese not have that

 

[Guyfang]

 

[Vic_949]

Mine doese not have that

Hey ray aldo do you you were I can buy a fuel tank like the same one because my really rusted and my fuel came really brown

 

[Guyfang]

Vic, do you know what a "slave Port" is?

 

[Vic_949]

Vic, do you know what a "slave Port" is?

No

 

[Vic_949]

No

I mean yes I do so I connect the negative one to the starter for p55y2n

 

[Mullaney]

No

.
Slave Port is on all military vehicles. Tanks, Trucks, MEP's ...

It is a way to get power to start without connecting accidentally hooking plus to minus or 24v onto a 12v system. It's a CYA kind of thing.

 

[Guyfang]

Now we are breaking ground. The slave port is a way to jump the generator set off, if the batteries are missing. We need to find out if you have one. If its missing, you can still use the generator. I will try and find a picture of it. Ray, if you have a picture, post it up .

 

[Vic_949]

.
Slave Port is on all military vehicles. Tanks, Trucks, MEP's ...

It is a way to get power to start without connecting accidentally hooking plus to minus or 24v onto a 12v system. It's a CYA kind of thing.

so I connect the negative one to the starter for p55y2n

 

[Guyfang]

Item #21 is the slave port