Mep003a Fuel injector parts

[Allen9999]

Could someone lead me in the right direction. I removed the injectors from my mep003a because of blow by. A MAC repair shop in Harrisonburg VA. matched them at 1750 PSI. total cost 67.00 US Green Backs, seem fair to me.
I need to replace the gasket heatshield, spacer plate(maybe) those look robust and the gasket insulator.
Part numbers in order as above.
5330-00-626-3966 Gasket Heatshield
5365-00-790-9338 Spacer Plate
5365-00-626-3963 G Insulator
my question is where can these be found? I've searched the internet and my thoughts are these numbers have changed. Last thing I want is to speak to someone without a clue and I'm sent the wrong parts. New to this sight so please chime in with a name or number from someone that knows about these beast. One more ? will those spacer plates need replacing I see no visible cracks chips ect.
Thanks
Tony

 

[Munchies]

ator.
Part numbers in order as above.
5330-00-626-3966 Gasket Heatshield
5365-00-790-9338 Spacer Plate
5365-00-626-3963 G Insulator

3966 SAIF shows them in stock

9338 kampi components and comtac unlimited show in stock

3963 SAIF industries again

 

[storeman]

Munchies,
any chance of getting links to these people? first time I've seen any of these company names.
thanks,
Jerry

 

[Munchies]

SAIF

SAIF INDUSTRIES
(Duns: 114123313)
1620 E BRUNDAGE LN 5
BAKERSFIELD, CA, 93307-2756
UNITED STATES
Phone:661-638-0786 Fax:661-638-0781

HUSAIN RASHIK
HRASHIK@SBCGLOBAL.NET
HUSAIN RASHIK
hrashik@sbcglobal.net

KAMPI COMPONENTS
KAMPI COMPONENTS CO. INC.
(Duns: 12267922
88 CANAL RD
FAIRLESS HILLS, PA, 19030-4302
UNITED STATES
Phone:2675434002 Fax:2155315558

AMY POTTS
amy@kampi.com
DON CHANDLER
don@kampi.com

COMTAC UNLIMITED INC.
(Duns: 832932136)
2825 WASHINGTON RD STE 103
AUGUSTA, GA, 30909-2119
UNITED STATES
Phone:706-394-2343 Fax:706-243-4749

 

[Allen9999]

Injector parts

Just received your reply. I'm a newbie to this sight my navigation skills are abit slow for now. I'll be smiling and dialing in the AM to locate these injector parts.

Again I thank all involved with this priceless information.

Thanks
Tony

 

[Munchies]

None of these places know what the items are or what they fit. They just know the NSN and how much $$ they want.

FYI

 

[Harleyd315]

Try your local Cummins dealer. All of Onan numbers are right below the part description in the parts book. 5365-00-626-3963 is Onan 147-0133. I have called for many items and had them delivered to my door. The warehouse is in Tenn I think. All the parts you need were available the last time I got an order.

 

[Isaac-1]

Also a number of Onan parts are available through Sears Parts direct, at a much lower price.

 

[LuckyDog]

5330-00-626-3966 Gasket Heatshield
Onan/Cummins PN: 110-0419 or 110A419
Bosch PN: 147-0043
5365-00-790-9338 Spacer Plate
Onan/Cummins PN: 147-0044 or 147A44

5365-00-626-3963 G Insulator
Onan/Cummins PN: 147-0043

Hope this helps.

 

[Allen9999]

LuckyDog
Thanks for turning on the light bulb last week. You mentioned/ Does the engine shut down or stalls.
I replied with un verified information as a controlled stop by the fuel solenoid. Thinking its either heat sensor or oil switches activating preventing a catastrophic engine failure.
Well it was STALLING after 3/5minutes.
I saw the light I disconnected the fuel line just before the IP ran the pumps for 3/5 minutes noticed plenty of air bubbles. After 10 min of purging I finally had a steady stream of fuel.
I haven’t tested the pumps yet I thought I would remove the Injector to solve the blow by issues no I’m hunting for the parts.

My navigation skills are sharpening the more I use SS sight

Thanks for everyone’s response

 

[Allen9999]

Harley
I'll keep these numbers in my TOOLBOX
Thanks