Munchies
Member
- 417
- 3
- 18
- Location
- Keesler Air force base/ MS
Close but no
yet.
We are trying to do it manually. It normally gets flashed at startup. Now you need to flash the field with wire to a battery. Completely seperate ofter on board circuit. Think the flash is 12v but double check.
Something like 6v on the mep016 head.
go to the troubleshooting section of the tm and see the engine runs but does not produce voltage diagnostic flow.
![A toast to MV's :beer: :beer:](https://www.steelsoldiers.com/images/smilies/beerchug.gif)
We are trying to do it manually. It normally gets flashed at startup. Now you need to flash the field with wire to a battery. Completely seperate ofter on board circuit. Think the flash is 12v but double check.
Something like 6v on the mep016 head.
go to the troubleshooting section of the tm and see the engine runs but does not produce voltage diagnostic flow.